Changing Out the Water

Tubs Compatible With These Instructions: 

• Deeptime Cold Plunge FiberCore Tub
• Deeptime Cold Plunge AirCore S Tub
  

Change Out Water: 

1. Remove the cap from the drain spigot.
2. Attach a garden hose to the spigot. 
3. Turn the red ball valve parallel to the tub to open the drain allowing the water to flow out.
4. Replace the cap after draining and turn the ball valve perpendicular to the tub to close the drain.
5. Refill the Cold Plunge and follow the initial setup instructions.

Frequency Requirements:

Please note: If you do not follow the frequency requirements for your tub set up your warranty could be voided. 

• FiberCore Tub/ AirCore S Tub with no Chiller - Weekly At Minimum
• FiberCore Tub/ AirCore S Tub with Chiller
  
  • Every 6 Months At Minimum if you are following the chemical protocol 
  • Every month if you choose not to follow a chemical protocol